Theater receivers have LOTS of power. These settings will optimize and protect your ORBs. You must verify the settings even AFTER using Audyssey mic setup.
ORBs are very robust, but if you don't set the crossover to 150/160 you will damage them. Never send low bass to tiny speakers.
Use 2 ORBs horizontally on basic desk stands. Most commonly for the center channel
Add 1 ORB to a MULTIMOUNT wall / ceiling mount
Attach 1 ORB to the Stud Zero (straight off any surface) wall or ceiling mount
Attach 1 ORB to the Stud 30 (30 degree fixed angle) wall or ceiling mount
Attach 2 ORBs to a Multimount vertically
Attach 2 ORBs to a T cozy style Multimount. Use horizontally for center channel, snug ceiling use OR vertically to angle in from side walls
Attach 2 ORBs vertically to the Stud Zero(straight off any surface) wall or ceiling mount
Attach 2 ORBs to the Stud 30 (30 degree fixed angle) wall or ceiling mount
Attach 1 or 2 ORBs to the Multiplate, outlet cover mount. You can also use the T Cozy style bracket with this cover plate
Attach 2 ORBs to the BOSS stainless wall mount. The same mount can also be used with a longer rod and 4 ORBs
Attach 2 ORBs to the BOSS horizontal stand. Use for center channel or when you need to save height
MOD4 Wiring Diagram
When using 4 ORBs they can be horizontal as a center channel or vertical on the BOSS wallmount or HOSS floor stands. The wiring is the same. It may look complicated but we are just adding 2 MOD2 together to yield an 8 OHM load.
